The main drain is often a job for drain cleaning professionals to repair. If you do want to try this on your own, do so with care. The main system and lines are some of the largest but they also collect the most material around the edges of them, which leads to more frequent clogging when they are not receiving regular cleanings. It is possible to clean out and open up these systems, but to do so you will need to know a few helpful tips and methods for doing so.

Inside the tank are two bolts holding the tank on to the base. Unscrew these two bolts and carefully lift clog the tank from the base. Remove tank to the trash.

If you find that the water line repair leak is in the supply line you will need to replace it or simply tighten it. Start by turning the water supply off and then flushing the toilet to get rid of the excess water. Now use the towels to dry the area so that it is easier for you to fix the leak. Use a wrench to loosen the hexagonal nuts on the supply line at the main end as well as the one which goes to the flush tank. Now use the replacement supply line which you have and tighten the bolt at the supply end first. Now adjust the length that you will need for the pipe to reach the flush tank. Once you adjust the length use a knife to cut the extra length and then tighten the hexagonal bolt at the other end.



After you have the stems out you should be able to find the washer on the "inside" end. If it is nicked, torn or brittle it is likely the cause of your drip. Even if it looks brand new, go ahead and replace it. You've already come this far. You can get replacement washers at almost any hardware store. Sometimes you may want to replace the whole stem, especially if the handle end is stripped out. It's best to just take the stem with you to the store and see if you can match it up. Most Do It Yourself stores have replacement stems for many popular brands. If your valve has a center diverter valve to switch the waterfrom the tub spout to the shower head the same process applies. Many times it is easier to replace the diverter stem than to repair it. This really depends on the design of the stem.

Working on the gas lines is also a complex job that only a licensed plumber can handle because it is very dangerous. Small leaks can't always be detected by odor alone, but a licensed professional has the proper equipment that's needed to ensure that you don't have any leaks in the line.

A broken water supply line can cause water to spurt from the line connecting the toilet to the main water valve. The first step to repair this leak is to shut off the water line repair supply valve. This will stop the flow of water to the toilet. Next, flush the toilet to remove the water from the bowl and hold down the handle until it is completely empty.

If you do in fact choose to replace it, there is a good chance that you have an Aqua Magic IV which is no longer produced and has been replaced with the new Aqua Magic V. If you are replacing your toilet and have the Thetford Aqua Magic IV, there are other options such as the Thetford Aqua Magic Style Plus or Thetford Bravura Toilet as well as choices from the Sealand line of toilets. You will have to choose whether you want a hand or foot flush, and whether you want to stay with plastic or upgrade to china. You will also have the choice of adding a water saver. Regardless of which choice you make you will most likely be happy with the quality and dependability of any product available.

Windshield repair techs come and go on a daily basis. The majority struggle to survive. Most fail. It's not that they're not good at what they do, it's not that they don't have the skills, it's not that they're not willing to work hard, it's their lack of MARKETING Training. That's the bottom line: It all comes down to proper marketing strategies.